pamelia mair Garage, 2017-11-12 20:46:45. In contrast to an overhead type of garage door, be it sectional or single panel, roll up doors have a totally different type of operating system. When these doors are used, they can be concealed in an overhead or under mounted trough. These doors operate similarly to a roll top desk door except for how they are stored when not in the closed position. They normally coil as they are retracted, and require significant gear trains to reduce the effort required to move these doors up and down into position. Often the forces needed to move these roll up doors require a reduction type of transmission that allows a very heavy door to be operated effortlessly. These doors can be chain driven either manually, or can be automated using electric motors. Roll up doors require more frequent evaluation and servicing than a standard overhead garage door. The tracks that are mounted vertically on both sides of the garage opening need maintenance and cleaning more frequently, and are often blocked by foreign obstructions or damaged by collision of some type. These roll up doors are often held open by some type of ratcheting action. Proper balancing of these doors is often more important than an overhead type of door, as the weight of these type of doors is normally much greater than an overhead door.
katrina maurye Garage, 2017-11-03 00:02:16. As a garage may store many different flammable items such as oil, automobile lubricants, gas, paint, wood, papers, and such others, a garage home owner will be wise to choose a garage heater with safety features such as an auto temperature regulator. While it is important to keep oneself warm and comfortable while in your garage, safety should not be overlooked as well. Unregulated heat from your garage heater may prove harmful to chemicals and other flammable items stored in your garage.
alyse heskett Garage, 2017-11-03 00:02:17. In the past, the biggest concern with operating an overhead garage door was the potential risks associated with the springs used for balancing the door weight. Pre mid 1960’s garage door installations typically relied upon a pair of stretched (tensioned) springs to assist the operation of the garage door pivoting hinges. These springs became loaded (tensioned) as the door was moved into the closed position. Unloading (releasing) of the stored spring energy occurred as the door was opened to the horizontal overhead position. One of the most dangerous aspects of these spring systems was that after a period of time, often without any maintenance or inspection, the points of attachment of these springs would rust or become weak. This weakening of the springs or points of attachment would often lead to an inadvertent explosive failure flinging the broken spring components across the garage, embedding the spring or steel components into the garage walls, cars or other items in the path of travel. Unfortunately, sometimes people were in the path of travel of these explosive occurrences. As these springs failed, as an attempted safeguard, some manufacturers devised a "caging" system for the springs. These cages were retrofitted onto the stretched springs in an attempt to capture the parts that would release if a failure occurred. While these caging devices were helpful, they were not completely effective. Some of these spring devices are still in use today. Whenever this condition exists or the quality of garage components are questionable, a qualified professional service technician should be consulted.
pamelia mair Garage, 2017-11-01 10:47:27. As a door expert witness, I am called upon many times a year to evaluate garage door injuries. Garage doors come in many shapes and sizes. Their functions range from basic security of an area to cosmetic concealment. Most doors can be broken down into a few basic styles or categories. Typical modern garage doors for residential applications tend to be predominantly of the overhead sectional variety. That style of door comes in many configurations, materials, levels of insulation, and a wide range of appearance possibilities. They are available as a prefabricated kit, or built as a custom design to complement the dacor of any building. Commercial warehouse type installations often dictate higher security requirements. A good choice for this security type of door is the "roll-up" style that resembles a roll top desk type of door. This door can be manufactured with a variety of materials that can be as strong as the adjacent walls, making forced entry through this opening very difficult. Other common commercial installations include light weight aluminum single or sectional panel doors. These doors function more for closing off an already secured area than for assuring point security
vanessaas scenciov Garage, 2017-11-01 10:47:26. Lighting: With the garage now being used for a variety of different reasons it is more important than ever to ensure that everything is well lit. To create the perfect lighting introduce strong LED spotlights across the whole of the garage. Not only do these create excellent light but they are also extremely efficient. If you have specific work areas consider lighting these separately, for example with under-cabinet lights.
Roseline rizarry Garage, 2017-11-03 00:02:13. The best feature of the Rubbermaid FastTrack garage storage organization system is that you are never stuck with your current garage system design. You can rearrange your current selection of garage storage products or add new components whenever you need to, and it only takes seconds to make the change! When it comes to dynamic storage for garage items, the Rubbermaid FastTrack is truly the perfect garage solution.
alyse heskett Garage, 2017-11-03 00:02:14. The rails come in two sizes 48-inch and 84-inch. Each of the garage storage racks and baskets will probably need a couple of inches of clearance to each side of the length listed in the products description, where as garage cabinets and shelves can butt up right against the next one. The trick comes in with some of the specially sports racks, particularly the bike racks and golf bag rack. These garage storage racks are smaller than the space that the items they store are. The Horizontal bike rack needs enough space to span a bike, but if it is put at the edge of the FastTrack it will take up less of the rail space. The vertical bike may block the a lower rail, this can be taken care of by offsetting the rails by one stud and hanging the bike at the end. Finally the golf bag rack is going to be almost as wide as the rack and two golf bags, since they hang off the sides. If you keep all of these considerations in mind, your Rubbermaid FastTrack Garage Organization Systems will exceed all of your needs as the perfect storage for garage organization!
pamelia mair Garage, 2017-11-03 00:02:15. In response to the inherently dangerous old style garage spring issues as above, a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end, while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables, connectors and pulleys, the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring, the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition. With a torsion type of spring, the energy is imparted or removed by rotating the spring clockwise or counter clockwise depending upon the direction of usage. With professional installation, the complete loading of the torsion spring is controlled by the garage installer, and is determined by the weight and size of the garage door that it is operating. When this type of torsion spring fails, it remains attached and intact to the location on the horizontal control rod where it was mounted. I have not heard of or seen any torsion spring fly across a garage, creating injury from failed components as with the stretched older style garage door springs. This is not to say that injuries have not occurred with the torsion style spring. The installation of this type of spring is generally safe when left to a trained garage door installation professional. Severe and serious injuries have occurred when untrained, unqualified individuals have attempted to install or service this type of spring. In most installations, a warning tag is left attached adjacent to the torsion spring when the garage door is installed. This tag warns of the danger associated with the stored energy of this spring, and alerts untrained individuals to not attempt any repair, adjustment or to even touch the spring and associated hardware. When the label that should be attached to this spring becomes damaged, is removed or tampered with, it is important that a new warning label be reattached immediately to show the dangers of this spring tension